Broadley Technologies 14 Manuel d'instructions télécharger pdf (Page 38)

Model 14 Oxygen Analyzer

Chapter 6:

Calibrating the Instrument

6.1. Calibrating the Temperature Sensor

The temperature sensor is located in the dissolved oxygen measurement probe. It is pre-set by the factory, but needs

to be calibrated in the sample, on-site. The temperature sensor must be calibrated before calibrating the sensor’s

slope and zero.

6-1

NOTE

See Chapter 5 for programming commands.

REMARK

Any result (calibration or measurement) is always brought back to the

reference temperature (25˚C, 77˚F). If the sample temperature is different

from the reference temperature, manual or automatic temperature

compensation must be used.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Pas de commentaire

Broadley Technologies 14 Manuel d'instructions Page 38